scroll and find out more...
Handling equipment - Receiving hopper | RH 12 Combi
Intake volume up to 8 m³ and soil cleaning, pre-grading and picking
The compact Combi suits especially medium sized farms. The design of the hopper floor and cleaning unit, as well as the infinite drive combine high output with extremely gentle crop handling at the same time. The roller picking table turns the crop while transferring, to assist picking. Depending on the requirements as regards accuracy of grading and gentle crop handling, the Combi can be combined with a web grader or a one- or two-stage coil unit.
Category:
- Please select...
- Highlights
- Benefits
- Images / video clips
- Configuration
- Downloads
Gentle transfer between the single units ensured by direct coupling
Ergonomically designed roller picking table
Pre-grading at rear of picking table via WG 900
Pre-grading at rear of picking table via spiral coils
Benefits
- compactly designed receiving hopper, particularly suitable for narrow building arrangements
- Gentle intake due to soft rubber floor
- Optimum dragging effect via crop- and belt-saving flights on the conveyor belt
- Optimum crop flow due to infinitely variable hopper floor speed
- Gentle crop discharge from the hopper floor onto the spiral coils
- Gentle soil cleaning with PU spiral rollers
- Infinitely speed adjustment in two packets (coil 1, 3, 5 and 2, 4, 6) ensure optimal separation
- Quick adaption of the soil cleaning to varying amount of trash via infinitely levelling and distance adjustment of the PU-coils
- the intensity of cleaning can be adapted via levelling adjustment
- perfect transfer in variable conditions: a constant and protective crop flow from the soil cleaning unit onto the roller picking table is even ensured, when the distance of the rollers of the cleaning unit are adjusted. This is made possible by a mechanical coupling of the cleaning unit and the roller picking table.
- Ergonomically designed roller picking table
- Variable use by a wide range of sorting- respectively pre-grading units (WG 900, pre-grading via PU-spiral rollers into one or two sizes)
- Maintenance free direct drives
- hydraulic drives enable an infinitely adjustment and thus a targeted adaptation of the machine for a particularly gentle cleaning
- Comfortable operation via GBT 831 operator terminal
Images / video clips
Specifications
You'll find all the information about the standard features of the machine here.
Configuration
- Soft rubber belt with 15 mm high flights
- Height adjustable intake flap
- Infinitely adjustable hopper floor speed
- Soil cleaning C6 with PU spiral coils
- Hydraulic distance adjustment of the soil cleaning unit
- Infinitely speed adjustment of the PU spiral coils
- Difference speed setting of the PU spiral coils
- Soil cross conveyor
- Roller picking table for up to 4 persons
- Working platform with incl. 2 stairs
- 2 lights
- Emergency stop via cable control
- Infinitely adjustable picking web speed
- Crop cross conveyor
- Operation via GBT 831 operator terminal (incl. 8 m connecting cable)
Technical data
5221-010 RH 12-40 Combi
| Intake | |
|---|---|
| Intake height (min.) | 850 mm |
| Intake height (max.) | 1000 mm |
| Intake width | 2900 mm |
| Hopper floor width | 1400 mm |
| Hopper floor length | 4000 mm |
| Hopper floor speed | 1 - 5 m/min |
| Capacity | 6 m³ |
| Soil cleaning / pre-grading | |
| Width | 1200 mm |
| Number of coils | 6 |
| Coil distance | 5 - 45 mm |
| Power supply | |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Power with crop cross conveyor following picking table (standard) | 10 kW |
| Power with F6 following picking table (option) | 15 kW |
| Output with F7F6 following picking table (option) | kW |
| Output with WG 900 following picking table (option) | 10 kW |
5221-020 RH 12-60 Combi
| Intake | |
|---|---|
| Intake height (min.) | 850 mm |
| Intake height (max.) | 1000 mm |
| Intake width | 2900 mm |
| Hopper floor width | 1400 mm |
| Hopper floor length | 6000 mm |
| Hopper floor speed | 1 - 5 m/min |
| Capacity | 8 m³ |
| Soil cleaning / pre-grading | |
| Width | 1200 mm |
| Number of coils | 6 |
| Coil distance | 5 - 45 mm |
| Power supply | |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Power with crop cross conveyor following picking table (standard) | 10 kW |
| Power with F6 following picking table (option) | 15 kW |
| Output with F7F6 following picking table (option) | 15 kW |
| Output with WG 900 following picking table (option) | 10 kW |
