GRIMME United Kingdom

scroll and find out more...

Harvesting Technology - Windrower | WR 200

2-row, trailed, adaptable to various conditions, from 47 HP on

The Windrower WR 200 modular design combines the proven digging units from the SE family. In total 4 different versions are available: - long main web and centre discharge, without haulm separation, for areas, where harvesting "by hand" is standard - long main web and centre discharge, with haulm separation, for areas, where harvesting "by hand" is standard - with an additional 2nd main web, double roller scraper and centre discharge, specially for the 2-stage harvest system - with lateral discharge of the crop between the neighbouring two rows for harvesting 2 + 2 = 4 rows at once

Gentle crop intake

The mechanical ridge relief minimises clodding in heavy soils and thus ensures improved crop protection. In sandy soils the crop flow is also improved because the ridges will not fall apart.

High degree of agility and manoeuvrability

The axle steering improves agility and correction at slopes. In addition, the wheels can be moved to the centre position at the push of a button using the axle self-centre steering, further enhancing the driver's operating comfort.

Stepless adjustment of the ascent-angle of the main web

The main web angle can be adjusted via hydraulic cylinders to adapt to a wide range of harvesting conditions. This not only increases ground clearance but also achieves an optimum compromise between sieving performance and crop protection.

For heavy digging conditions

The combination of a rocker agitator (option) with a rotary agitator ensure additional, gentle sieving on the first main web.

Benefits

  • General information about WR
    • Easy to pull but strong machine starting at 47 HP tractor power
    • For row widths of 75 and 90 cm
    • As standard with four disc coulters and two diablo rollers for accurate depth control of ridge intake
    • The drive and the digging units are taken from proven 2-row harvester technology
    • Reliability and low maintenance also with high output
    • A load-sensing kit to reduce oil heating and energy input is available
  • WR 200 CE
    • A bed level adjuster and a following bed roller ensure an even and slightly compacted surface, the harvested crop stays on the surface for better drying.
    • With its long, full width main web and a central, superficial deposit of the harvested tubers, the machine is perfectly suitable for the entry into mechanised potato harvesting.
  • WR 200 CHE
    • Suitable for two-phase (delayed, discontinous) harvest process
    • A bed level adjuster and a following bed roller ensure an even and slightly compacted surface, the harvested crop stays on the surface for better drying.
    • Behind the long main web the machine is equipped with an extracting roller in order to remove haulm from the crop flow.
    • Extracted haulm is deposited next to the potatoes, by use of a traverse haulm discharge conveyor.
  • The windrowing machine with its counter-rotating hedgehog belt and a central, superficial deposit of the potatoes is ideally suited for the two-phase harvesting process. In this case the machine is followed by a single-row potato harvester.
  • WR 200 CDW
    • Suitable for two-phase (delayed, discontinous) harvest process
    • A bed level adjuster and a following bed roller ensure an even and slightly compacted surface, the harvested crop stays on the surface for better drying.
    • A long first main web, followed by a drop step onto the second main web ensure an improved sieving performance of impurities.
    • Due to the central superficial depositing of the potatoes, gently guided by double scraper roller on both sides, the machine is ideally suited for the two-phase harvesting process in combination with a single or double row potato harvester.
  • WR 200 S
    • Suitable for two-phase fortified harvest process
    • A long first main web, followed by a drop step onto a short second main web ensure a good sieving performance of impurities.
  • Behind the first main web, an extracting roller separates the haulm and weed from the crop flow.
  • The crop cross conveyor, which is mounted on the rear side of the main web, enables this machine to be used in an enriched harvesting process - in combination with a two-row potato harvester (2 + 2 = 4 rows).

Images / video clips

Specifications

You'll find all the information about the standard features of the machine here.

Configuration

  • Intake width 580, 600 or 620 mm
  • First main web with lock connection facilitates a quick change of the webs in changing harvesting conditions
  • Centre retaining flap
  • 2- or 3-piece share blade for optimum intake with different soil conditions
  • 4 disc coulters grant a blockage free potato intake
  • 2 large haulm feed-in rollers minimize haulm blockages
  • Wheels 10.0/75-15 AW for WR 200 CE and for WR 200 CHE
  • Wheels 11.5/80-15.3 AS for WR 200 CDW and for WR 200 S
  • Drive shaft with overload clutch to protect the machine
  • Connection to tractor hydraulics
  • Rotary agitator with manual adjustment of intensity

Technical data

5180-010 WR 200 CE

Dimensions  
Length 5700 mm
Width 2280 mm
Height 1890 mm
Weight  
Empty weight with basic configuration 2800 kg
Tractor attachment  
Lower linkage category 2 Cat.
Drive  
Input speed p.t.o.-shaft 540 rpm
Main webs  
1st main web width 1700 mm
2nd main web width mm
1st main web sieving area 6 m²
2nd main web sieving area
Wheels  
Wheels 10/75-15 AW
Chassis and engine  
Transport speed (option) 25 km/h
Tractor requirements  
Engine power (min.) 35 kW
Required control valves (single acting) 11
Required control valves (double acting)

5180-020 WR 200 CHE

Dimensions  
Length 6660 mm
Width 2280 mm
Height 1890 mm
Weight  
Empty weight with basic configuration 2800 kg
Tractor attachment  
Lower linkage category 2 Cat.
Drive  
Input speed p.t.o.-shaft 540 rpm
Main webs  
1st main web width 1700 mm
2nd main web width mm
1st main web sieving area 4,6 m²
2nd main web sieving area
Wheels  
Wheels 10/75-15 AW
Chassis and engine  
Transport speed (option) 25 km/h
Tractor requirements  
Engine power (min.) 35 kW
Required control valves (single acting) 11
Required control valves (double acting)

5180-030 WR 200 CDW

Dimensions  
Length 8500 mm
Width 2340 mm
Height 2360 mm
Weight  
Empty weight with basic configuration 3230 kg
Tractor attachment  
Lower linkage category 2 Cat.
Drive  
Input speed p.t.o.-shaft 540 rpm
Main webs  
1st main web width 1700 mm
2nd main web width 1700 mm
1st main web sieving area 4,6 m²
2nd main web sieving area 3,5 m²
Wheels  
Wheels 11.5/80-15.3 AS
Chassis and engine  
Transport speed (option) 25 km/h
Tractor requirements  
Engine power (min.) 55 kW
Required control valves (single acting) 12
Required control valves (double acting) 1

5180-040 WR 200 S

Dimensions  
Length 6780 mm
Width 2410 mm
Height 1925 mm
Weight  
Empty weight with basic configuration 2800 kg
Tractor attachment  
Lower linkage category 2 Cat.
Drive  
Input speed p.t.o.-shaft 540 rpm
Main webs  
1st main web width 1700 mm
2nd main web width 1700 mm
1st main web sieving area 4,6 m²
2nd main web sieving area 1,5 m²
Wheels  
Wheels 11.5/80-15.3 AS
Chassis and engine  
Transport speed (option) 25 km/h
Tractor requirements  
Engine power (min.) 55 kW
Required control valves (single acting) 11
Required control valves (double acting) 1

You may also be interested in these products: