GRIMME United Kingdom

scroll and find out more...

Harvesting Technology - 2-row | EVO 280

Offset trailed machine, 2-row, 8 t bunker, for high yield in separation and output

The GRIMME EVO 280 sets new standards in performance and efficiency. In the most difficult conditions, the EVO 280 with its three large separators, the unique, infinitely variable drive called "VarioDrive" and an 8-ton bunker enables a maximum output while at the same time protecting the crop. Various intake units are available for harvesting different crops. The telescopic axle ensures a safe road transport with a machine width of only 3.00 m on the one hand. On the other hand, it ensures maximum driving stability in the field as the axle can be extended by an impressive 500 mm.

Maximum output quantity

The EasySep separator is used on light soils with small trash proportion and high throughputs.

Maximum separating performance

The speed of the two finger belts can be separately adjusted by hydraulic means. They are thus optimally suited for use on soils with a high clod but low stone content.

VarioDrive: infinitely main web drive

The infinitely variable drive of the main webs is available for use in various conditions. The drive can be set independently of the PTO shaft speed of the tractor and can be reversed in case of blockages.

Transport width of only 3 m

The EVO 280 is powerful but still compact in design to realize a transport width of 3 meter. The up to 3.5 meter telescopic axle ensures exceptional stability of the harvester even when the bunker is full.

Full power

The large bunker capacity of 8 t makes it possible to cover longer distances / longer fields in case of the same yields. The productivity of the harvester can thus be increased.

Variable use

Depending on the cultivation method (rows, beds, flat beds etc.), a wide range of different vegetables such as carrots, celeriac, red beet or onions can also be harvested besides to potatoes.

The customer portal myGRIMME

MyGRIMME offers various modules such as a powerful order management, an intuitive web shop, a map view and other functionalities such as a machine overview, so-called "geofencing" and a link to the data exchange platform agrirouter. 

Video: The harvester EVO 280 at work

Benefits

  • Crop protection
    • Main webs with high-cam belt for optimum gentle crop handling
    • Reduced drop heights throughout the machine for a gentle crop transfer
    • Active running side bars at the second main web for crop transfer without friction at the side walls
    • Gentle handling into the bunker, resulting from low drop height
    • Soft bunker floor, pockets in the bunker cloth ensure a very good dragging effect
    • Gentle handling of the crop at bunker emptying, crop chute available as an option for direct box filling and addtional gentle crop handling
  • High acreage performance and separating effect
    • VarioDrive: The stepless, power split transmission for the main webs
    • Long first main web for effective sieving
    • Intake web for higher sieving performance
    • Haulm separation with wide deviner web, separation from the tubers over the whole length of the deviner web, minimum drop height
    • 1st separator: Hedgehog web with triple scraper roller to separate soil and fine haulm
    • 2nd separator: Hedgehog web with double scraper roller to separate soil and fine haulm
    • 3nd separator type ClodSep: Hedgehog web with Infinitely adjustable finger web, optimum setting of the trash separation
    • 3rd separator EasySep: Hedgehog web with double scraper roller
    • Bunker filling optimization to increase the bunker capacity.
    • 8 t Bunker capacity: This results in a noticeably smaller amount of so called "multiple overrunning" of wheels when the bunker is full.
  • Chassis
    • Offset trailed machine: Tractors with wide wheels ensure an increased traction
    • The telescopic axle provides highest driving stability during harvesting and is retracted to 3.00 m for road transport, so that no special approval is required
    • Offset trailed machine: Tractors with wide wheels ensure an increased traction
    • Large-volume radial tyres with a size of 850/50 R30.5 for ground-protective driving on the field
  • Perfectly comfortable
    • Speedtronic: The load dependant and fully automatic speed control system for the separators and picking web relieves the driver from manual tasks and increases output.
    • Visual Protect: Automatically switch-on of cameras, where a critical situation has been noticed (risk of a separator blockage e.g.), so the driver can react faster and prevent the blockage
    • ISOBUS operator terminal CCI 1200, with intuitive operating interface GDI and diagnostic option, to realize a high operator comfort
    • MemoryControl For saving and "re-use" of specific harvest parameters
  • Versatility
    • The machine can be equipped with a windrow intake for the delayed, discontinuous ("two-phases") harvesting process.
    • Depending on the cultivation method (rows, beds, flat beds etc.), a wide range of different vegetables can also be harvested besides potatoes.

Images / video clips

Specifications

You'll find all the information about the standard features of the machine here.

Configuration

  • Offset pulled intake section with pulled, spring loaded disc coulters
  • Drawbar eye below or hitch coupling (under PTO shaft)
  • Hydraulic jack stand
  • Hydraulic drawbar steering incl. automatic self-centre steering
  • Automatic ridge pressure relief
  • Main web channel 1500 mm wide
  • Stainless steel in swing frame
  • Speed adjustment of the rocker agitator in the 1st main web adjustable via the operator terminal
  • Deviner web (200 or 280 mm pitch)
  • Self-hydraulic system to drive the separators
  • Slip control 1st separator and 2nd main web
  • Height adjustment of the 1st separator scraper roller via terminal
  • Speed adjustment of the 2 finger webs via terminal (ClodSep separator)
  • Speed adjustment 1st and 2nd separator from Terminal
  • Trash web control, difference speed to the picking table (ClodSep separator)
  • Platforms at both sides of the picking web
  • Final conveyor with ultrasonic-sensor
  • Bunker unloading height 4250 mm
  • Automatic bunker filling
  • Hopper capacity 8000 kg
  • Automatic bunker filling incl. automatic for final elevator and filling optimization
  • 2-step motor for bunker emptying
  • Warning system for tractor driver
  • Wheels 710/50-30.5
  • Hydraulic axle steering
  • Automatic axle self-centre steering and automatic levelling
  • ISOBUS Operator terminal CCI 50 with intuitive operating interface GDI and diagnostic option
  • ISOBUS
  • MemoryControl
  • MOT certification (Germany), brakes and road lights

Technical data

EVO 280

Dimensions  
Length 12000 mm
Width in transport position 3000 mm
Height 3990 mm
Weight  
Empty weight with basic configuration 15000 kg
Tractor attachment  
Low hitch x
Drive  
Input speed p.t.o.-shaft 540 / 1000 rpm
Main webs  
1st main web width 1500 mm
2nd main web width 1700 mm
1st main web sieving area 4,8 m²
2nd main web sieving area 4,2 m²
Separators  
Deviner web width 1700 mm
1st separator width 1500 mm
2nd separator width 1300 mm
3st separator width 2230 mm
Picking table  
Width 1100 mm
Trash web width 570 mm
Picking personal 3+3
Bunker  
Capacity 8000 kg
Unloading height 4250 mm
Wheels  
Wheels 710/50-30.5
Chassis and engine  
Air brake x
Transport speed 40 km/h
Tractor requirements  
Engine power (min.) 115 kW
Oil flow 80 l/min
Required control valves (double acting) 2
Non-pressurized return flow 1
ISOBUS x
ISOBUS InCab-plug 1
Permitted bearing load drawbar 4000 kg

You may also be interested in these products: